Home Products Passive Infrared Detector

QT-40 Pir Motion Sensor Quad - Tech Intrusion Detectors 10.525 GHz

All Products

Security Alarm Device (32)

Smart Home Security Devices (26)

Magnetic Door Contact (40)

Passive Infrared Detector (30)

Photo Beam Sensor (30)

Request To Exit Sensor (9)

Pressure Pad Sensor (2)

Emergency Panic Button (12)

Smart Toilet Seat Cover (30)

Bathroom Smart Toilet (14)

Smart Nursing System (5)

Vape E Cigarette (5)

Energy Saving Led Light Bulbs (8)

Wifi Outdoor Security Camera (10)

Indoor Wifi Security Camera (9)

Best Products

QT-60 Outdoor Infrared PIR Detector

DM-360 PIR Motion Sensor Dual Passive Infrared Detector

DM-360 Dual Element Passive Alarm Infrared Detector

Certification

I'm Online Chat Now

QT-40 Pir Motion Sensor Quad - Tech Intrusion Detectors 10.525 GHz

Name: QT-40 Pir Motion Sensor Quad - Tech Intrusion Detectors 10.525 GHz
Brand: ALEPH
SKU: QT-40
Price: 1.00 USD
Availability: InStock
Rating: 4.5 (172 reviews)

Large Image : QT-40 Pir Motion Sensor Quad - Tech Intrusion Detectors 10.525 GHz

Product Details:

Place of Origin:	China
Brand Name:	ALEPH
Certification:	CE ISO
Model Number:	QT-40

Payment & Shipping Terms:

Minimum Order Quantity:	1pcs
Price:	Negotiable
Packaging Details:	Packaging Details:gift box/color box packaging or according t
Delivery Time:	25-30 days
Payment Terms:	TT IN ADVANCE

Contact Now

Detailed Product Description

Input Voltage:	10 To 16 VDC, 12 VDC Nominal	Pyro Type:	Dual Element
Pulse Count:	Jumper Selectable: PC2, PC4	Warm-up Time:	< 50 Seconds
Alarm Period:	2.4 Seconds, Retriggerable	Visual Indicator:	Red Alarm LED (Selectable On / Off)
Weight:	3.7 Oz / 105 G	Environmental:	95% Humidity Non-condensing
Mounting Way:	Wall Mounted	Name:	Passive Infrared Detector
High Light:	pir detector dual passive infrared , passive infrared motion detector

Quad-Tech Intrusion Detectors

Description

Available with 40-foot and 60-foot protection patterns, QT Series intrusion detectors provide high quality PIR+microwave security at an outstanding value. Aleph’s unique “QT” signal processing evaluates PIR and microwave information while factoring in ambient temperature and light for superior “Quad-Tech” performance. The Security Light feature adds safety lighting, providing a soft white light when triggered in a darkened room.

Microwave Freq.	10.525 GHz, pulsed
Input Voltage	10 to 16 VDC, 12 VDC nominal
Input Current	15 mA max. (SL model 30 mA), 11 mA quiescent (approx.)
Pyro Type	Dual Element
Pulse Count	Jumper selectable: PC2, PC4
Warm-up Time	< 50 seconds
Alarm Period	2.4 seconds, retriggerable
Visual Indicator	Red Alarm LED (Selectable On / Off)
Alarm Output	NC, solid state, 19 VDC, 100 mA, 13 ohms resistance typ.
Tamper Output	NC, dry contact, 30 VDC, 500 mA, 5 W max.
Mounting Height	7 to 8.5 ft (2.1 to 2.6 m)
Operating Temp.	14° to 131° F (-10° to+55° C)
Environmental	95% humidity non-condensing
Weight	3.7 oz / 105 g
Dimensions	4.8” H x 2.5” W x 1.7” D / 12.2cm x 6.4cm x 4.3cm

Installation

Select an installation height between 7 ft. (2.1 m) and 8.5 ft. (2.6 m). Optimum mounting height is 7.5 ft. (2.3 m). Avoid aiming the intrusion detector towards windows, areas exposed to direct sunlight, and heating/cooling outlets. For best performance, position the detector so its field of view is unobstructed, and the anticipated path of an intruder will cross the PIR beam pattern.

Separate the front and rear covers by first backing out the cover latch screw three to four full turns. Using a small screwdriver or similar tool, release the cover latch. To remove the PCB, push the PCB latch away from the board while grasping a terminal block and pulling the PCB out of the cover. Do not pull on the microwave module. Refer to Figures 1 and 2, below.

Wire the detector to the control panel using 18 to 22 AWG conductor, standard non-shielded cable. Avoid running alarm wiring parallel to AC wiring. Wiring knockouts and wire channel are provided in the rear cover for unobtrusive wiring. Terminal block configuration is shown in Fig. 3, below.

Adjustments & Settings

Prior to mounting the detector, configure jumper settings as required (see Fig. 2, below).

Pulse Count: When Pulse Count jumper is covering both pins, PC is set at 2: two to three normal steps are required to trigger an alarm. Parking the PC jumper on one pin (or removing jumper) sets PC to 4: four to five steps will trigger an alarm.

50 / 60 Hz: Set to AC mains frequency for fluorescent light immunity. Jumper installed on both pins programs the detector for 60 Hz immunity. Parking the jumper on one pin (or removing jumper) programs the detector for 50 Hz immunity.

LED Enable: When Jumper is covering both pins, the Alarm LED is enabled. The Alarm LED glows through the lookdown lens when an alarm is

signaled at the Alarm Output terminals. LED brightness automatically increases when light level in detection area is high. As room light dims so does the LED brightness. Parking the jumper on one pin (or removing jumper) disables the Alarm LED but has no effect on the alarm output.

Microwave Sensitivity: Microwave Sensitivity Adjustment is set to the fully clockwise position at the factory for maximum sensitivity (range). The installation in a small room, it may be desirable to reduce microwave sensitivity. Turn the Microwave Sensitivity Adjustment (Fig. 2) counter-clockwise to reduce sensitivity. Setting the adjustment to minimum (fully counter-clockwise) reduces sensitivity to approximately one-third of its maximum value.

SL Front / SL Down: -- Included on Model QT-40SL -- These jumpers independently enable and disable Security Light “Front” and “Down”

functions. SL Front controls a single white LED which shines through the main lens. SL Down controls two white LEDs aimed downward through the lookdown lens. When enabled, Security Light will turn on when motion is detected and room light is dim. Continued motion will cause Security Light to remain on. Light will turn off approximately 10 seconds after motion ceases. NOTE: The red Alarm LED is suppressed while SL is operating.

Compliance Information:

All wiring should be in accordance with NEC, NFPA 70.
Product should be inspected and tested annually.
The included 100lb. Animal Immune lens and Security Light feature have not been investigated by Underwriters Laboratories Inc.
Indoor use.
The unit is intended to be connected to a compatible Listed power supply that provides a minimum of 4 hours standby time.
50/60 Hz jumper should be set to 60Hz (jumper installed) for N. American installations.
Maximum microwave sensitivity and Pulse Count 2 are to be used for UL applications.

Protection Patterns

QT-40 Pir Motion Sensor Quad - Tech Intrusion Detectors 10.525 GHz 2

Troubleshooting

Trouble	Likely Causes	Remedy
Unit does not power up.	No or low input power. Input power polarity reversed.	Apply proper input voltage. Correct wiring polarity.

Alarm LED does not light.	LED jumper is set to “LED OFF”. Incorrect sensor mounting height or aiming. Pulse count setting incorrect for protection area .	Set LED jumper to“LED ENABLED”. Alter the mounting height or aim. Set pulse count jumper to suit the detection requirements.

Alarm LED / Relaytriggers without movement in the protection area.	Animals / rodents in protection area. Heating or air conditioning outlets in sensor view. If using the optional animal immune lens: Pet access to furniture or room fixture in view of the detector.	Block access of animals / rodents. Re-aim sensor. Ensure that pets can not climb up onto furniture / fixtures in protection area.

An alarm is indicated at the LED but not at the alarm output.	Incorrect wiring at the alarm output terminals. Lightning damage.	Correct the wiring fault. Replace sensor.

Alarm LED on constantly, no fault in protected area or wiring .	Defective unit.	Replace sensor.
Unit continues to operate after input power has been disconnected.	The wire to the power input was disconnected, the “+” is still connected. The power is finding a return path through the Alarm Output protection device and alarm wiring.	Disconnect wire from the “+” power input.

Maintenance

INSPECTION: An inspection of this unit should be made periodically, including, but not limited to all mounting, wiring, and the condition of the interior area and components.
CLEANING: Clean the external plastic parts of this unit with a soft, clean, cloth dampened with water.
TESTING: This unit should be tested routinely for proper operation. At a minimum, operation should be fully checked yearly.