Payment & Shipping Terms:
|Operating Current:||20mA(max.)||Sensitivity:||2°C(0. 6m/sec)|
|Input Voltage:||10〜16V DC||Warm-up Period:||35±5sec|
|Alarm Output:||N.C., 20V DC 100mA Max.||Mounting Height:||7.8 〜11.8ft (2.4〜3.6m)|
|Environmen Hum:||95% Max.||Weight:||4.2 Oz (121g)|
|Production Process:||Injection||Anti RF Interference:||Yes|
pir detector dual passive infrared,
passive infrared motion sensor
INDOOR DUAL PASSIVE INFRARED DETECTOR
|Detection Range||Coverage10m diameter (Mounting height 3m)|
|Input Voltage||10〜16V DC|
|LED Indicator||Red Alarm LED(Selectable On/Off)|
|Alarm Output||N.C., 20V DC 100mA max.|
|Tamper Output||N.C.,Open when cover is removed. 30V DC,0.5A max.|
|Mounting Height||7.8 〜11.8ft (2.4〜3.6m)|
|Operating Temp.||14°F ~ 131°F (-10C〜55C)|
|Environmen Hum||95% max.|
|Weight||4.2 oz (121g)|
|Dimensions||4.72"DIA.x1.61" H (120mmDIA.x41mm H)|
|Unit does not power up.||No or low input power.||Apply proper input voltage.|
|Input power polarity reversed.||Correct wiring polarity.|
|Alarm LED does not light.||LED jumper is set to “LED OFF”.||Set LED jumper to “LED ENABLE”(See Section 2).|
|Incorrect sensor mounting height.||Increase /decrease mounting height.|
|Alarm LED/Relay triggers without movement in detection area.||Unsecured environment:Animals / rodents in detection area .||Block access of animals / rodents.|
|Heater/air conditioning equipment in sensor view.||Re-aim sensor.|
|Direct sun or headlights in sensor view.||Add curtain / shade to block light sources.|
|LED indicates alarm, no alarm output.||Incorrect wiring at alarm output terminals.||Correct wiring fault.|
|Lightning damage.||Replace sensor.|
|Alarm LED on constantly, no fault in protected area or wiring.||Defective unit.||Replace sensor.|
|Unit continues to operate after the input power has been disc-onnected.||The wire to the “ - ” power input was disconnected, the“ + ” is still connected. the power can now find a
return path through the Alarm Output protection device and alarm wiring.
|Disconnect wire from the “ + “ power input.|
1. The product shall be installed indoor and do not use it under the following conditions.
① In the place where it is likely to be exposed to dust, high humidity,high temperatures,or rain.
② In the place where it is closed to magnetic field.
③ In the place where vibration or shock is directly transmitted to the product.
2. In order to ensure the normal operation of the product. It should be cleaned and maintained regularly.
① Please power off before cleaning the product.
② Do not use chemical detergents to clean the product.
3. Never disassemble, repair and modify the product.
4. The product comply with the SJ/T11363-2006 Standard and requirements of RoHS.
5. Specifications and design are subject to change without prior notice.
Contact Person: Sales Manager
DC 9V Home Security System Control Panel With Real Time Display / Weather Reminding Function
Wireless Gsm Smart Home Security Devices , House Security Alarm Control Panel
433MHz Smart Home Smoke Detector Easy Installation And Maintenance
DC-1551WG B; ABS Material Surface Mount Door Contact Sensor For Wooden Door Or Window
DC-1561W; Lightweight Wired Magnetic Door Contact Door Sensor With Anti - Theft Function
DC-1551WG B; ABS Housing Magnetic Door Contact Sensor , Magnetic Sensor Alarm Door Contact
Alarm Security Systems Portable Panic Button For Emergency Situation
ABS Housing Security Panic Button And Emergency Button For Home / Bank
Flame Retardant Shell Emergency Panic Button For Elderly ISO Certificated