|
Product Details:
Payment & Shipping Terms:
|
| Input Voltage: | 10〜16V DC | Operating Current: | 20mA(max.) |
|---|---|---|---|
| Sensitivity: | 2°C(0. 6m/sec) | Warm-up Period: | 35±5sec |
| Alarm Output: | N.C., 20V DC 100mA Max. | Mounting Height: | 7.8 〜11.8ft (2.4〜3.6m) |
| Environmen Hum: | 95% Max. | Weight: | 4.2 Oz (121g) |
| Production Process: | Injection | Anti RF Interference: | Yes |
| False Alarm Protection: | Yes | Installation: | Ceiling Mounted |
| Color: | White | ||
| High Light: | pir detector dual passive infrared,passive infrared motion detector |
||
INDOOR DUAL PASSIVE INFRARED DETECTOR
| MODEL | DM-360 |
| Detection Range | Coverage10m diameter (Mounting height 3m) |
| Input Voltage | 10〜16V DC |
| Operating Current | 20mA(max.) |
| Sensitivity | 2°C(0. 6m/sec) |
| Warm-up Period | 35±5sec |
| Alarm Period | 2.0±0.5sec |
| LED Indicator | Red Alarm LED(Selectable On/Off) |
| Alarm Output | N.C., 20V DC 100mA max. |
| Tamper Output | N.C.,Open when cover is removed. 30V DC,0.5A max. |
| Mounting Height | 7.8 〜11.8ft (2.4〜3.6m) |
| Operating Temp. | 14°F ~ 131°F (-10C〜55C) |
| Environmen Hum | 95% max. |
| Weight | 4.2 oz (121g) |
| Dimensions | 4.72"DIA.x1.61" H (120mmDIA.x41mm H) |
| TROUBLE | TROUBLE CAUSE | REMEDY |
| Unit does not power up. | No or low input power. | Apply proper input voltage. |
| Input power polarity reversed. | Correct wiring polarity. | |
| Alarm LED does not light. | LED jumper is set to “LED OFF”. | Set LED jumper to “LED ENABLE”(See Section 2). |
| Incorrect sensor mounting height. | Increase /decrease mounting height. |
| TROUBLE | TROUBLE CAUSE | REMEDY | ||
| Alarm LED/Relay triggers without movement in detection area. | Unsecured environment:Animals / rodents in detection area . | Block access of animals / rodents. | ||
| Heater/air conditioning equipment in sensor view. | Re-aim sensor. | |||
| Direct sun or headlights in sensor view. | Add curtain / shade to block light sources. | |||
| LED indicates alarm, no alarm output. | Incorrect wiring at alarm output terminals. | Correct wiring fault. | ||
| Lightning damage. | Replace sensor. | |||
| Alarm LED on constantly, no fault in protected area or wiring. | Defective unit. | Replace sensor. | ||
| Unit continues to operate after the input power has been disc-onnected. | The wire to the “ - ” power input was disconnected, the“ + ” is still connected. the power can now find a return path through the Alarm Output protection device and alarm wiring. |
Disconnect wire from the “ + “ power input. | ||
8. NOTES
1. The product shall be installed indoor and do not use it under the following conditions.
① In the place where it is likely to be exposed to dust, high humidity,high temperatures,or rain.
② In the place where it is closed to magnetic field.
③ In the place where vibration or shock is directly transmitted to the product.
2. In order to ensure the normal operation of the product. It should be cleaned and maintained regularly.
① Please power off before cleaning the product.
② Do not use chemical detergents to clean the product.
3. Never disassemble, repair and modify the product.
4. The product comply with the SJ/T11363-2006 Standard and requirements of RoHS.
5. Specifications and design are subject to change without prior notice.
DC 9V Home Security System Control Panel With Real Time Display / Weather Reminding Function
Wireless Gsm Smart Home Security Devices , House Security Alarm Control Panel
433MHz Smart Home Smoke Detector Easy Installation And Maintenance
DC-1551WG B; ABS Material Surface Mount Door Contact Sensor For Wooden Door Or Window
DC-1561W; Lightweight Wired Magnetic Door Contact Door Sensor With Anti - Theft Function
DC-1551WG B; ABS Housing Magnetic Door Contact Sensor , Magnetic Sensor Alarm Door Contact
Alarm Security Systems Portable Panic Button For Emergency Situation
ABS Housing Security Panic Button And Emergency Button For Home / Bank
Flame Retardant Shell Emergency Panic Button For Elderly ISO Certificated
